Royal Aircraft Services | home
Primer Application
Two-part corrosion inhibiting epoxy primer is applied by sprayer. A final hand wipe-down with tack cloth is done to remove any particles from the surface before priming.
The primer must be applied within 48 hours after the application of the chromate conversion coating chemical.
The product should never be applied unless the air, the primer, and the aircraft surface temperature is above 50° F (10 ° C) and the surface temperature is at least 5 ° F (3 ° C) above the dew point.
Our paint booth is heated prior to application using natural gas radiant heaters, supplemented by a natural-gas fired furnace coupled to our air intake-filtration system.
|